CG10/13 Subframe

Subframe suitable for Nissan CG13 1.3l 16v engine and  gearbox

The frame is all brand new and uses custom engine mounts . It is designed for the CG10 1.0l and CG13 1.3l 16v engine and  gearbox.( gearbox pic above)As with all our frames the cg13 frame can use the rubber donut/coil spring replacement or coilovers, and all with standard track and wheel base.The frame and engine/gearbox assembly will fit a standard round nose.

As with any classic mini, suspension setup is crucial , this issue is even more of a priority with high power conversions using basic mini suspension geometry, wheel alignment, corner weighting, bump steer correction and keeping scrub radius to a minimum will all enhance the driving pleasure of the completed conversion. Please refer to faq for some handy setup tips.

Suitable for RHD only, for LHD the steering rack will need moving.

Included with this subframe :

*choice of front x member for standard round nose or clubman front.

* eng mnt bkts to suit either cg10or cg13/3 70sh eng mnts

*3 stainless steel eng mnt res cups

*Pair subframe top washers

*front engine mnt bkt includes parts to create an altenator bkt

*various fasteners for basic installation.

The subframe is designed for spherical jointed bottom arm and tie bars, the allspeed items are plug and play with the subframe, it may be possible to modify or adapt others to fit.

As with every Allspeed subframe, the product is all new material manufactured by ourselves. Every subframe has gone through an extensive design and fea stress analysis progamme. Our subframes are not to be confused or compared with cut and shut 'a' series subframes or reverse engineered products. The Allspeed product is the original and designed from the outset for the application and manufactured to the highest standards